48V LFeLi Battery

Lithium iron Phosphate battery (LiFePO4) has a nominal voltage of 48VDC. It is comprised by 16 cells of 3.2V each. The internal structure of LiFePO4 battery cell is shown in the figure on the right. Shown is the olivine structure of LiFePO4 as the positive electrode of cell. Aluminum foil functions as current collector of positive pole


Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 74
48V LFeLi Battery

Features and Benefits


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    Lithium iron phosphate (LiFePO4) is used as positive material, which offers extended cycle life and good safety performance.


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    Embedded BMS offers voltage, current, temperature protection and alarm functions. BMS can communnicate with other device by modbus protocol


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    Embedded BMS unit measures current, voltage, single cell surface temperature and the ambient temperature of the battery.


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    Embedded BMS offers four remote functions which can communicate with far-end central control center by computer management.


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    The combination of BMS and computer management technology can achieve real-time monitoring and control of various parameters and status.


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    The power system has secondary cut-off protection and when the voltage is too low the system will cut off the support from the battery to protect the battery service life.


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    Under normal operating conditions, the entire system emits very little noise due to their passive cooling design.


  • Warning: Trying to access array offset on value of type bool in /home/leochacc/tele-power.com/wp-content/themes/leochbattery/product-detail.php on line 96
    Features and Benefits

    Good electromagnetics shielding.

Technical Specifications

Providing you information at your fingertips

1. Wireless Hut back-up power

2. Wireless Repeater back-up

3. Fiber-Optic access network back-up power

4. Outdoor Billboard lighting

5. 48V Switchgear & Control Back-up Power

6. Long duration Industrial UPS Systems

7. FTTB & LAN/WIFI Connection Power

8. Street & Highway Monitoring & Surveillance

Other Categories

 

Providing a wide range of batteries to meet your needs.

Network Power

Network Power

Network energy products such as Telecom and UPS batteries produced…

Transportation

Transportation

Leoch start batteries are mainly used in ignition of automobile…
Motive Power

Motive Power

Leoch motive power batteries are
mainly used in electronic bicycles…
Lithium Batteries

Lithium Batteries

Li-Ion batteries are usually used in telecommunications as backup power or in

Get in touch with us

[smartblock id=259]
Top
Fatal error: Uncaught TypeError: call_user_func_array(): Argument #1 ($callback) must be a valid callback, non-static method wp_jquery_manager_plugin::autoptimize_support() cannot be called statically in /home/leochacc/tele-power.com/wp-includes/class-wp-hook.php:307 Stack trace: #0 /home/leochacc/tele-power.com/wp-includes/plugin.php(189): WP_Hook->apply_filters(Array, Array) #1 /home/leochacc/tele-power.com/wp-content/plugins/autoptimize/classes/autoptimizeScripts.php(286): apply_filters('autoptimize_fil...', Array) #2 /home/leochacc/tele-power.com/wp-content/plugins/autoptimize/classes/autoptimizeMain.php(591): autoptimizeScripts->read(Array) #3 [internal function]: autoptimizeMain->end_buffering('<!doctype html>...', 9) #4 /home/leochacc/tele-power.com/wp-includes/functions.php(5221): ob_end_flush() #5 /home/leochacc/tele-power.com/wp-includes/class-wp-hook.php(307): wp_ob_end_flush_all('') #6 /home/leochacc/tele-power.com/wp-includes/class-wp-hook.php(331): WP_Hook->apply_filters(NULL, Array) #7 /home/leochacc/tele-power.com/wp-includes/plugin.php(474): WP_Hook->do_action(Array) #8 /home/leochacc/tele-power.com/wp-includes/load.php(1100): do_action('shutdown') #9 [internal function]: shutdown_action_hook() #10 {main} thrown in /home/leochacc/tele-power.com/wp-includes/class-wp-hook.php on line 307